background image

24

USER ASSISTANCE

Atlantic Ultraviolet Corporation

®

 

makes every effort to ensure that the 

SANITRON

®

 

/ MIGHTY

«

PURE

®

 

Ultraviolet Water Purifiers is a product 

of superior quality and workmanship. 

This manual describes the installation, 

operation and maintenance of the 

SANITRON

®

 

/ MIGHTY

«

PURE

®

.

Please read and become familiar with the 

contents of this manual before installing 

or using this unit. If after reading the 

manual you still have questions, or 

concerns, regarding the installation or 

use of this unit, contact our offices, 

weekdays between 8:30 am and 5:00 pm 

Eastern Time, at:

Atlantic Ultraviolet Corporation

®

375 Marcus Boulevard

Hauppauge, New York, 11788
Tel: 631.273.0500

Fax: 631.273.0771

E-mail: [email protected]

Website: Ultraviolet.com

 

BuyUltraviolet.com

PRODUCT REGISTRATION

Please REGISTER your product immediately - you can do this in a number of ways. Go online to Ultraviolet.com  and on the 

bottom left of each page either click on “Fill out Warranty Reg. Form on-line!” complete and hit submit or click on “Download 

a PDF of the Warranty Reg. card” which you can print, fill out and mail in. If you prefer to register over the telephone please call 

631-273-0500.
Atlantic Ultraviolet Corporation

®

 takes all possible precautions when packaging equipment to prevent damage. Carefully inspect 

and report all damage. Do not install damaged equipment. Follow all instructions on any labels or tags. Carefully inspect all 

packing materials before discarding to prevent the loss of accessories, mounting hardware, spare parts or instructions.

For your convenience, record the following information below. The model and serial number can be found on a label located on 

the 

SANITRON

®

 

/ MIGHTY

«

PURE

®

 

Ultraviolet Water Purifier. Keep this manual, along with proof of purchase, handy when 

contacting our offices.

Purchased From:

Date:

Model:

Serial No.:

WARRANTY

We warrant that this product will be free from defects in material and workmanship for a period of one year from the date of 

shipment thereof or the product’s total rated life, whichever first occurs. Within the warranty period we shall repair or replace such 

products, which are returned to us with shipping charges prepaid, and which are determined by us to be defective. This warranty 

will not apply to any product, which has been subjected to misuse, negligence, or accident; or misapplied; or modified; or repaired 

by unauthorized persons; or improperly installed.
The Buyer shall inspect the product promptly after receipt and shall notify us at our main office in writing of claims, including 

claims of breach of warranty, within thirty (30) days after the Buyer discovers or should have discovered the facts upon which 

 

the claim is based. Failure of the Buyer to give written notice of a claim within the time period shall be deemed to be a waiver 

 

of such claim.
The provisions of the above warranty are our sole obligation and exclude all other remedies or warranties, expressed or implied, 

including warranties of merchantability and fitness for a particular purpose, whether or not purposes or specifications are 

described herein. We further disclaim any responsibility whatsoever to the customer, or to any person, for injury to person, 

damage to, or loss of property or value caused by any product which has been subjected to misuse, negligence, accident; or 

modified or repaired by unauthorized persons; or improperly installed.

Under no circumstances shall the Atlantic Ultraviolet Corporation

®

 be liable for any incidental, consequential or special damages, 

losses or expenses arising from the contract for this product, or in connection with the use of, or inability to use, our product for 

any purpose whatsoever.

P

atent

 n

otiCe

No attempt has been made to determine the patent status of applications illustrated or described in this publication. Inclusion 

in this publication of any design or method of use, which may be patented, is not to be construed as promoting or sanctioning 

unauthorized use.

Summary of Contents for Mighty Pure MP36C

























Reviews: