Atlantic Technology STA-200 User Manual Download Page 3

FCC Compliance Statement 

This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interfer- ence 

that may cause undesired operation.

 

FCC WARNING 

This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may cause harmful 

inerference to radio communications.

However, there is no guarantee that interference will not occur in a particu- lar 

installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equip- 

ment off and on, the user is encouraged to try to correct the interference by one 

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet different from that to which the receiver 

is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: 

To comply with the limits for an FCC Class B comput

ing device, always use any shielded signal cord supplied with this unit.

The Federal Communications Commission warns that changes or modifica- 

tions of the unit not expressly approved by the party responsible for compli- 

ance could void the user’s authority to operate the equipment.

Radio Frequency Interference Statement

Warning:

This is a Class B product. In a domestic environment, this product may cause 

radio interference in which case the user may be required to take adequate 

measures.

 

European Union Information on Disposal for Users of Waste 
Electrical & Electronic Equipment (private households) 

This symbol on the product(s) and / or accompanying documents means 

that used electrical and electronic products should not be mixed with 

general household waste. For proper treatment, recovery and recycling, 

please take this product(s) to designated collection points where it will be 

accepted free of charge. 
Alternatively, in some countries you may be able to return your products 

to your local retailer upon purchase of an equivalent new product. 

Disposing of this product correctly will help save valuable resources and 

prevent any potential negative effects on human health and the environ- 

ment, which could otherwise arise from inappropriate waste handling. 

Please contact your local authority for further details of your nearest 

desig- nated collection point. 
Penalties may be applicable for incorrect disposal of this waste, in accor- 

dance with you national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact 

your dealer or supplier for further information. 
Information on Disposal in other Countries outside the European Union 

This symbol is only valid in the European Union. If you wish to discard 

this product please contact your local authorities or dealer and ask for the 

cor- rect method of disposal. 

Important Safety Instructions 

Qualcomm aptX is a product of Qualcomm Technologies International, 
Ltd.

 

Qualcomm is a trademark of Qualcomm Incorporated, registered in

 

the United States and other countries, used with permission. aptX is a

 

trademark of Qualcomm Technologies International, Ltd., registered in 
the

 

United States and other countries, used with permission.

2/18

Summary of Contents for STA-200





















Reviews: