Speaker Output
L
L
R
Line in
Line out
R
R
L
+
_
Power
On
O
ff
100-240~50/60Hz
200 Watts Max Power
Using the Line
in
Analog Audio Input
12/18
Audio Source
IR
Audio Input
Connect your line
in
input to the input labeled "Line in" on the back of
your STA-200.
Click the Gear button to cycle to AUX mode. When in AUX mode, the
yellow LED above AUX will illuminate.
Make sure no cables are plugged
into the
audio input
jack located
on the front of the STA-200.
A
plug in the
audio input
jack will
block any audio signal from the
Line in input on the back.
IR
Audio Input
Using the AUX Audio Input
Click the Gear button to cycle to AUX mode. When in AUX mode, the
yellow LED above AUX will illuminate.
Plug your audio device into the AUX jack located on the front of the
STA-200.
