7
Instruction Manual
Speaker Connection and Assembly
Strip about ½” (13 mm) of insulation from the connecting wires. Connect
them to the appropriate push terminal, being careful to observe polarity
(positive to the red terminal, negative to the black terminal).
Installing the Speaker Baffle into the Frame
Once the frame is mounted in the wall, the speaker simply fits into the
frame. Use the included screws (including two removed earlier) to attach
the baffle to the mounting frame,
but be very careful not to overtighten the
screws.
Front Panel Controls
HF (High Frequency) Level Control
This control adjusts the relative level of high frequency output to compen-
sate for varying room acoustics or placement behind a screen.
“+2” is for absorptive, acoustically “dead” rooms (or
when the speaker is behind a movie screen). Use this
position to increase the HF level and restore the proper
sparkle and liveliness to the sound.
“0” is for rooms of average absorptive characteristics.
“-2“ should be used in rooms that are highly reflective, with hard floors
and exposed windows.
The setting of the HF control is mostly a matter of personal taste, so try it
in all three positions and see which one is preferred.
for non-localizable surround use, or for room-filling background music
(“whole house audio”) use.
IR Knockout
There’s a “knockout” plug in the front baffle. You can identify it by locating
the Atlantic Technology wave logo which is molded into it. If you are using
a multi-room control system, you can install a standard IR receiver in the
knockout hole.
Specifications
IWTS-5 LCR
IWTS-10 LCR
Type
2-way M-T-M
Optimum wall volume
0.5 - 1 cu. ft.
0.5 - 1.25 cu. ft.
Drivers/Design
woofers 1 - 6½" GLH*
2 - 6 ½” GLH*
tweeter 1 - 1" Silk dome
1 - 1” Silk dome
Frequency Response
52 - 20kHz ± 3dB
46 - 20kHz +/- 3dB
Sensitivity
87dB
89dB
Impedance
6 Ohms
6 Ohms
Crossover Frequency
3400Hz, 4th order Linkwitz-Riley
Amplifier Power
25-125 Watts
25-150 Watts
Dimensions (grill frame)
8
7
/
16
" x 11" x 3
5
/
8
" 8
7
/
16
" x 17¼” x 3
5
/
8
"
(W x H x D)
215 x 280 x 86mm
215 x 438 x 86mm
Cutout Dimensions
7
1
/
8
" x 9¾"
7” x 15
13
/
16
"
(W x H)
181 x 248mm
178 x 402mm
Net Weight
6.3lbs; 2.8kg each
7.5lbs; 3.4kg each
New Construction Kit
IN-NC-5
IN-NC-10
*Graphite Loaded Homopolymer
Specifications are those in effect at the time of printing. Atlantic Technology reserves the right
to change specifications or appearance at any time without notice.
Should you have any questions or problems please feel free to contact us at
781-762-6300 or through our web site, www.atlantictechnology.com.
Front Panel Controls
