Atlantic Technology IWTS-5 LCR Instruction Manual Download Page 4

 IWTS-5 LCR & IWTS-10 LCR In-Wall Theater System Speakers 

Home Theater Placement

Home Theater Systems

Today’s home theater systems require you to place six or 
more speakers in your room. For the most convincing 
theater effects, speaker placement must be very carefully 
thought out. This is especially true with in-wall speakers, 
since their installation is permanent!

Left/Center/Right Locations

 The tweeter in the  front three 

speakers should be at or just above ear height when seated, 
just as with stereo speakers. Try to keep the vertical position 
of the three front speakers within 18 inches of each other, as 
this will maintain smooth, believable left-center-right pans. 

Left 

Left 

Dipole

Surround

or

Left 

IWTS-5

Surround

Right 

IWTS-5

Surround

Back

Right

Dipole

Surround

or

Right

IWTS-5

Surround

Left

IWTS-5

Surround

Back

Center 

Right 

Front Speaker Array 

should be  

placed as close to ear level as 

possible. 

Optional Dipole/Bipole 

Speakers 

should be 

placed directly to the 

sides of the seating area 

and approximately  

1-2 feet (.3-.6 meter) 

above the listener’s ear 

level. 

Optional Surround Back Speakers 

should be placed approximately 1-2 

feet (.3-.6 meter) above the listener’s 

ear level. Bipole or direct radiators 

may be used here.

Optional Direct Radiator Speakers 

should be placed slightly behind the 

listening position, above ear level. 

Subwoofer

Subwoofer 

placement is 

dependent on room 

size and shape. 

Experiment to find a 

location that 
produces the 

smoothest response.

The spacing of the left-right speakers can be a little wider 
than with 2-channel stereo speakers, since in a theater sys-
tem, the center channel speaker reproduces the on-screen 
effects and anchors the center image. Left-right spacing of 
about 8 to10 feet usually works well.

Surround Speakers

 In order to achieve optimum perfor-

mance we strongly recommend Atlantic Technology Dipole 
or TriVector™ surround speakers. If you are using our dedi-
cated surround speakers please follow the placement rec-
ommendations included in their installation instructions.

Non-Dipole Surrounds

 The most realistic surround effects 

occur when the listener can’t localize the actual location of 
the surround speaker.  If you decide to use the In-Wall The-
ater System speakers as surround speakers, mount them 
above the listeners’ ears, slightly behind the listening area 
either on the side or rear walls. 

Summary of Contents for IWTS-5 LCR









Reviews: