Maintenance
Here are a few simple guidelines that can greatly improve your
listening
·
Always store your FS-HAL1 in the provided case.
·
In case of poor sound quality due to earwax in the sound bore,
remove the eartip and use a clean dry towel to wipe off the earwax.
Never use any other object to attempt to remove the earwax as this
may result in damage to the FS-HAL1s and will void the warranty.
·
Do not use the cord to remove the FS-HAL1s from your ears. This
may cause damage to the cord and result in poor performance.
Damage of this nature is not covered by the warranty.
·
Do not expose your FS-HAL1 to temperature extremes.
·
Avoid strong impacts to your FS-HAL1.
·
Wipe down your FS-HAL1 after each use.
·
Never immerse them in water.
Please Note: Moisture in your FS-HAL1 can cause temporary performance
issues. Do not insert your FS-HAL1 if your ears are wet. Always dry your ears
completely before inserting your FS-HAL1s. Should you inadvertently allow
water or perspiration into the FS-HAL1s and they quit working, allow to dry
completely before attempting to use again. Minor moisture build-up should dry
out and not affect long-term performance.
Extended exposure to moisture or submersion will result in permanent damage (not
covered by the warranty).
Please read this important information before using your
FS-HAL1. If everything sounds muffled or you hear ringing or buzzing after using
your FS-HAL1, your ears are trying to give you a warning!
