Atlanta 4500A Technical Manual & Parts Lists Download Page 63

Page: 63 / 166

Technical Manual & Parts Lists

2.3.2 Changing the Needle on Sew Head 1 & 2

Please follow all safety procedures, turning the power off to the machine is recommended.

Locate the slotted needle screw, located on the left side of the needle chuck.

Insert a small flat blade screw drive through loosens the screw. Do not remove the screw. Remove the

old needle.

Insert the new needle into the needle hole at the bottom of the needle chuck, push up until it stops. Turn

the needle until the scarf of the needle is pointing to the back side. Tighten the needle screw. Needle:

TVX7 110/18

Thread the new needle, should be from front to back.

a. How to set the needle

Do not set the needle in direction “C” as illustrated or uneven stitches may be formed in the

reverse feed. However, it is advisable to set the needle with such a slight inclination as “A”

when using filament threads and “B” for cotton threads to prevent the stitches from skipping.

Summary of Contents for 4500A







































































































































































Search results

Summary of Contents for 4500A

Reviews:

Related manuals for 4500A

Brands by name

Popular brands

Atlanta 4500A, Technical Manual & Parts Lists

Search results

Summary of Contents for 4500A

Reviews:

Related manuals for 4500A

Brands by name

Popular brands