background image

Technical Manual & Parts Lists 

 

Important Safety Instruction 

This part of the Instruction Material is provided for the safe use of your equipment. 
It contains important information to help work safely with the unit and describes the 
dangers inherent in machinery. Some of these dangers are obvious, while others are 
less evident.  
 
 

Mandatory Information

 

All persons operating and/or working on the 1342A Long Arm Label Sewer should read and understand 
all parts of the Safety Instructions. This applies, in particular, for persons who only operate and/or work 
on the unit occasionally (e.g. for maintenance and repair). Persons who have difficulty reading must 
receive particularly thorough instruction.

 

 

Scope of the Instruction Material 

 

The Instruction Material comprises: 

 

Safety information 

 

Operator Instructions 

 

Electrical and Pneumatic diagrams 

And may also include; 

 

A list of recommended spare parts 

 

Instruction Manual(s) for components made by other manufacturers 

 

The layout and installation diagram containing information for installation 

Intended Use 

Our machines are designed and built in line with the state of the art and the accepted safety rules. 
However, all machines may endanger the life and limb of their users and/or third parties and be damaged 
or cause damage to other property, particularly if they are operated incorrectly or used for purposes 
other than those specified in the Instruction Manual.  

Exclusion of Misuse 

Non-conforming uses include, for example, using the equipment for something 
other than it was designed for, as well as operation without duly installed safety 
equipment. The risk rests exclusively with the end user. 
 
Conforming use of the machine includes compliance with the technical data, 
information and regulations in all parts of the complete Instruction Material, as 
well as compliance with the maintenance regulations. All local safety and 
accident prevention regulations must also be observed. 

 
 
 

 

Summary of Contents for 1342a





















Reviews: