16
Possible faults
Fault
Possible cause
Removal (disconnect power plug)
Hedge trimmer does not work.
•
No power
•
Power failure
•
Extension cable defect
•
Safety fuse defect
•
Motor or switch defect
•
Check cable, no longer use defect cable
protection
•
Check cable, no longer use defect cable
protection
•
Check power supply, power outlet, fuse
•
Replace fuse
•
Have motor or switch checked by an
approved electrician or replaced by original
spare parts
Hedge trimmer cuts with
interruptions
•
Cable defect
•
Internal failure
•
Circuit closer/breaker defect
•
Check cable, no longer use defect cable
protection
•
Manufacturer or responsible customer
service respectively must be called
•
Manufacturer or responsible customer
service respectively must be called
Motor is running, knives do not
move
•
Internal failure
•
Manufacturer or responsible customer
service respectively must be called
Knives get hot
•
Knives are edgeless
•
Knives are defect
•
Missing lubrication => friction
•
Arrange sharpening of knives
•
Exchange knives
•
Lubricating of knives
Motor is humming, knives do not
move
•
Knives are blocking
•
Remove object
Technical Data
Type
HS 710/71
HS 710/61
Model designation
HS 710/71
HS 710/61
Motor output P
1
710 W
Mains voltage / Mains frequency
230 V~ / 50 Hz
No-load speed n
0
1600 min
–1
Length of knives
710 mm
610 mm
Cutting length
630 mm
534 mm
Thickness of blade
1,8 mm
Cutting distance
22 mm
Adjustment of handhold
± 90° (180°)
Hand-arm vibration front according to EN 1033/DIN 45675
a
vhw
= < 2,05m/s²
Hand-arm vibration rear according to EN 1033/DIN 45675
a
vhw
= < 3,77m/s²
Sound power level L
wa
(according to regulation 2000/14/EC)
measured sound power level 100,2 dB (A)
guaranteed sound power level 103,2 dB (A)
Sound pressure level L
PA
(according to regulation 2000/14/EG)
87,2 dB (A)
Weight
ca. 4,2 kg
ca. 3,3 kg
Protection class
II