ATIKA HHS 710/56, Original Instructions Manual, Page: 23 / 120

23
Possible faults
Fault Possible cause Removal (disconnect power plug)
Hedge trimmer does not work. •
No power
•
Power failure
•
Extension cable defect
•
Safety fuse defect
•
Motor or switch defect
•
Check cable, no longer use defect cable protection
•
Check cable, no longer use defect cable protection
•
Check power supply, power outlet, fuse
•
Replace fuse
•
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Hedge trimmer cuts with
interruptions •
Cable defect
•
Internal failure
•
Circuit closer/breaker defect
•
Check cable, no longer use defect cable protection
•
Manufacturer or responsible customer
service respectively must be called
•
Manufacturer or responsible customer service
respectively must be called
Motor is running, knives do not
move •
Internal failure
•
Manufacturer or responsible customer service
respectively must be called
Knives get hot
•
Knives are edgeless
•
Knives are defect
•
Missing lubrication => friction
•
Arrange sharpening of knives
•
Exchange knives
•
Lubricating of knives
Motor is humming, knives do not
move •
Knives are blocking
•
Remove object
Technical Data
Typ / Modell HHS 710/56
Year of construction see last page
Motor output P
1
710 W
Mains voltage / Mains frequency 230 V~ / 50 Hz
No-load speed n
0
1800 min
–1
Length of knives 560 mm
Cutting length 510 mm
Cutting distance 27 mm
Hand-arm vibration according to EN 60745
Front handle
Rear handle
Measuring uncertainty K
a
vhw
= <5.237 m/s²
a
vhw
= <3.543 m/s²
K = 1.5 m/s²
Measured sound power level L
wa
Guaranteed sound power level L
wa
99,8 dB (A) (according to regulation 2000/14/EC)
102 dB (A) (according to regulation 2000/14/EC)
Sound pressure level L
PA
80,4 dB (A); (according to regulation 2000/14/EG)
Measuring uncertainty K K = 3.0 dB (A)
Teleskopstiel - Höhe min. ( Höhe max.) ca. 2,4 m (2,8 m)
Gewicht (mit Teleskopstiel) ca. 3,9 kg (4,9 kg)
Protection class II