16
Possible faults
Before each fault elimination:
−
Switch off device
−
Wait unitl the saw comes to a stop.
−
Pull out power plug
After each fault clearance, put into operation and recheck all security installations.
Fault
Possible cause
Remedy
Machine fails to start after switching on
•
Power failure
•
Extension cable defect
•
Motor or switch defect
•
Check the fuse.
•
Check cable, no longer use defect cable
•
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Jigging does not work
•
Transport locking device not released
•
Remove transport locking device (23)
Machine stops while cutting
•
Saw blade blunt
•
Feed is too great
•
Replace saw blade (14)
•
Allow motor to cool and proceed working with less
pressure
Work piece jammed when pushing
forwards or backwards
•
Saw blade blunt
•
Hold the work piece firmly and cut off the motor
immediately. Replace then the saw blade.
Burned spots at the cut areas
•
Saw blade blunt
•
Replace saw blade
Saw vibrates
•
Saw blade is warped
•
Saw blade not properly mounted
•
Replace saw blade
•
Mount saw blade properly
Recuperating mechanism of the jigging
device does not work
•
Recuperating spring broken or worn out
•
Recuperating bolt popped out from its bracket
•
Replace the recuperating spring
•
Insert the recuperating bolt in its bracket and secure it
with a cotter pin
Decelaration too slow (time to dead stop
>10 sec.)
•
Motor brake defective
•
Brake disk worn
•
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Technical data
Type
BWS 500
Year of construction
see last page
Motor rating P
1
3,0 KW S 6 – 40 %
Motor output P
2
2,2 KW S 6 – 40 %
Mains voltage
230 V~
Mains frequency
50 Hz
No-load speed n
0
2990 min
–1
Protection class
IP 54
Mains fuse
16 A slow
Saw blade (carbide tipped saw blade)
min.
∅
495 mm
max.
∅
500 mm
Saw blade location hole
∅
30 mm
Number of teeth
36
Thickness of splitting wedge
2,8 mm
Cut width
3,8 mm
max. cutting capacity
approx.
∅
min. 30 mm to max. 180 mm
Wood length, max.
1000 mm
Wood length, min.
200 mm
Dimensions (length x breadth x height)
875 x 980 x 920
Weight (incl. accessories)
56,5 kg
Guarantee
Please observe the enclosed terms of guarantee.
