14
The device will be automatically entered to low-power mode (Sleep mode) if user does not use it for the designated time.
User can change the designated time at the control panel and power as below. If user sets proper time-out,
the device can be protected from the situation of power-on without user and battery can be prolonged.
[Start Button] -> [Setting] -> [Power] -> [Advanced]
▶
Automatic Power OFF
Chapter 3.
Basic Function
▶
Power Button
1. When the system is in booting status, press <Power> button for 2~3 seconds, then the screen
Power On:
◆
Note:
and these programs will be recovered in case of power-on.
If both main battery and backup battery are in the discharge state, the RAM data will disappear,
and the system will be re-starting if the power is charged again.
User can enter the above screen in case of double clicking the icon of <Power indication>
on and start the system.
2. System will automatically be turned on if it is connected with USB cable for ActiveSync
System can be turned on in case of low-power mode by pushing the <POWER> button
Power Icon