ATI Technologies V7200 - Firegl 256 Mb Pcie, User Manual

Page: 15 / 72

Display Configurations 9
Turning on the System
If you have properly installed your graphics card, operating system
messages will appear once the boot procedure is finished.
Your monitor will be running in a basic video mode. Higher refresh rates
are not available at this stage of the installation. Once you have installed the
FireGL™ drivers and software, you can use the Display Properties control
panel to adjust the video settings and configure multiple monitors.
CRT d
DFP d
Quad-buffered
stereographics
device VGA connector
with VGA-to-DVI-I
a
DVI-I con
Quad-buffered
stereographics Check driver release notes for
limitations on the use of
stereographics.
CRT d
CRT d
Quad-buffered
stereographics
device VGA connector
with VGA-to-DVI-I
a
VGA connector
with VGA-to-DVI-I
a
Quad-buffered
stereographics Check driver release notes for
limitations on the use of
stereographics.
L
WARNING - Turn on your monitor before you turn on your
computer. Failure to do so could damage your monitor.
Display
Configuration Connector(s)
Used Comments