ATI Technologies V7200 - Firegl 256 Mb Pcie, User Manual

Page: 11 / 72

Detailed Installation 5
CHAPTER 2:
Installing Hardware
This chapter will guide you through the physical installation of your new
graphics card.
Detailed Installation
The following instructions will take you step by step through the
installation of your new FireGL™.
1
Turn off the computer, monitor, and other peripheral devices.
2
Unplug the computer’s power cord and disconnect all cables from the
back of your computer.
3
Remove the computer cover.
If necessary, consult your computer’s manual for help in removing
the cover.
4
Unscrew or unfasten and remove any existing graphics card from
your computer.
Note: If your computer has an on-board graphics capability, you may
need to disable it on the motherboard. For more information, see your
computer documentation.
L
WARNING
- Wait approximately 20 seconds after unplugging the
power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.
L
WARNING
- Remember to discharge your body’s static electricity by
touching the power supply or the metal surface of the computer
chassis.