ATI Technologies FireGL V7100, User Manual

Page: 21 / 51

Monitor Configuration 15
8
After the system reboots, the
Found New Hardware
message may
display the
Digital Signature Not Found
message. Click
Yes
or
Continue to complete the driver installation.
Monitor Configuration
Once the drivers and software have been installed, you can configure your
monitor.
To configure your primary display
1
Navigate to the Control Panel and choose
Display
or right-click on
the desktop and choose Properties .
2
Choose the
Settings
tab and select a screen resolution and color
depth that best suit your requirements and your monitor’s
performance.
3
Click the
Advanced
button and select the
Monitor
tab.
4
Choose a refresh rate from the drop-down list.
5
Click
OK
until you return to the desktop.
To set up a multi-monitor display
1
From the Start menu click Control Panel , then Display . Click the
Settings
tab to access the basic multi-monitor configuration settings.
Note: ATI software provides many additional configuration features
that can be accessed by clicking the
Advanced
button from the
Display Properties > Settings
tab.
2
Select the
Monitor
icon identified by the number
2
.
3
Click
Extend my Windows desktop onto this monitor
.
4
Set the Screen Resolution and Color Quality as appropriate for the
second monitor. Click Apply or OK to apply these new values.
• Refer to your Windows online help and documentation for
further information on using the Settings tab.
L
WARNING
- Choosing a refresh rate unsupported by your monitor
may damage your monitor. Consult your monitor’s documentation if
necessary.