Public
4
DOC-000078
Power up the devices and press the Online icon in the project toolbar (or press F4) to enable communication.
Building the device tree:
DLX Datalogger in the device tree:
Note:
Refer to the VISION User Manual for more information on adding hardware to the VISION Device tree.
DLX
LED Status Lights
The DLX has seven status lights that display the DLX states by blinking, staying solid and changing colors based on the
function being performed, connectivity status or errors that may occur.
LED Indicator
State
Light Definition
PWR
Solid Primary (green)
Unit is powered.
Flashing Primary (green)
Data Logger is in Triggered State.
Flashing Secondary (red)
Data Logger has critical errors.
USB
Flashing Primary (green)
Unit is receiving USB message.
Flashing Secondary (yellow) Unit is transmitting USB messages.
CAN 1 & CAN 2
Flashing Primary (green)
Unit is receiving CAN message.
Flashing Secondary (yellow) Unit is transmitting CAN messages.
Solid Primary (green)
N/A (Reserved for Reception Errors)
Solid Secondary (yellow)
N/A (Reserved for Transmission Errors)
Aux Com Indicators
•
LIN
(DLX 1100 Only)
•
KLINE
(Both models)
Flashing Primary (green)
Unit is receiving.
Flashing Secondary (yellow) Unit is transmitting.
Solid Primary (green)
N/A (Reserved for Reception Errors)
Solid Secondary (yellow)
N/A (Reserved for Transmission Errors)
LOG
Flashing Primary (green)
Data Logger is in Pre-Armed or Armed state.
Solid Primary (green)
Data Logger is in Triggered state.
Flashing Secondary (red)
Error that doesn't prevent logging occurred.
Solid Secondary (red)
Error that prevents logging has occurred.
