Conductivity Testing for Chemicals
To test if chemicals have been added to the wash trough the system needs to compare the water
conductivity before and after the chemicals have been added. For this each step has the ability to store the
conductivity or compare the conductivity.
To toggle the mode of the conductivity test for a step press the Shift key and 0 key together.
Inserting or Deleting Steps
Pressing the Insert key
will insert a copy of the current step after it and move
onto it to edit.
Pressing the Delete key
will delete the current step.
The final 2 steps Stop Block and Pause Block. They have the same outputs available, but are used when
the Skip or Pause keys are pressed.
Press the Cancel key
to return to the setup menu.
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
ly
2
0
1
8
48
| Auto Wash Pro Manual | v1.2
pause block
stop block
Insert
Prog 2
Delete
Prog 3
Shift
+
0
Shift
+
s01 NONE
Step will neither store
the conductivity or
compare it
s01 STORE COND
Step will store the
conductivity
s01 COMPARE CON
Step will compare the
conductivity to the
previously stored one
Shift
+
Cancel
Reset
