6
7
EN
EN
If the engine does not start or does not work properly after this
procedure, e.g. for an incorrect installation of the ECU or an
inaccurate idle and TPS calibration:
1. Uninstall GET RX1 Pro ECU.
2. Install the OEM ECU back and resume the original engine idle setting.
3. Start the bike and verify that the engine is working properly.
4. Turn off the engine, uninstall the OEM ECU and re-install GET
RX1 Pro ECU.
5. Repeat steps 1, 2, 3 of “Idle regulation”.
3.
Resume the initial position
of the throttle position
adjuster: rotate clockwise for
7 rounds.
7
ROUND
F. SYMBOLS AND CERTIFICATIONS
We declare that this product supplied is compliant with
RoHS Directive 2011/65/EU amended by the Directive
2015/863/EU (RoHS3) relative on the Restriction of
the Use of Certain Hazardous Substances.
G. DISPOSAL
Pursuant to art. 26 of Legislative Decree no. 49 of 14
March 2014, “Implementation of Directive 2012/19/EU
on waste electrical and electronic equipment (WEEE)”.
The crossed-out wheelie bin symbol displayed on a product or its
packaging indicates that when the equipment reaches the end of its life
cycle it must be disposed of separately from other waste for purposes
of treatment and recycling. Once such products reach the end of their
life cycle, users may dispose of them free of charge at special municipal
centres for the collection of waste electrical and electronic equipment, or
return them to the distributor under one of the following arrangements:
- very small products, i.e. equipment with no external dimension
exceeding 25 cm, may be returned with no obligation to buy to
H. “RACE USE ONLY” DISCLAIMER
Due to the particular operative and environmental conditions
under which the “Race Use only” Products operate during
competitions, such Products may be subject to use under
extreme conditions, which may exceed the project limits and
control as set by ATHENA. ATHENA shall not have any liability
whatsoever in connection with the use of the “Race Use only”
Products under extreme conditions during the competitions, nor
shall any “Product liability” apply in such case. Therefore “Race
Use only” Products are excluded from any form of guarantee.
The “Race Use only” Products are designed and manufactured
for competitive-sporting use. Therefore, the “Race Use only”
Products shall not be used on public roads. ATHENA shall not
have any liability whatsoever in connection with the use of
the “Race Use only” Products in violation of such limits. Any
alteration of or tampering with the “Race Use only” Products
may endanger their safety. ATHENA shall not have any liability
whatsoever in connection with Client’s failure to comply with the
instructions given by ATHENA and/or in connection with their
inappropriate and/or incorrect installation on vehicles and/or
with the lack of or incorrect maintenance of such Products, nor
shall any “Product liability” apply in such cases.
distributors whose sales areas dedicated to electrical and electronic
equipment exceed 400 m2. Distributors with smaller sales areas are
not obliged to participate in this scheme.
- products of dimensions greater than 25 cm may be returned to distributors
under a “one for one” arrangement, i.e. the distributor is only obliged to
receive the product in return for the purchase of a new, equivalent product,
with one new product being purchased for every waste product returned.
The separate collection and subsequent processing of products for
purposes of recycling, treatment and environmentally sound disposal
helps avoid potentially harmful effects on the environment and
human health, and facilitates the reuse/recycling of the materials
contained in the products. Users abusively disposing of products are
subject to the penalties applicable under the respective legislation.