![ATH W102 Operating Instructions Manual Download Page 7](http://html.mh-extra.com/html/ath/w102/w102_operating-instructions-manual_2998294007.webp)
® Copyright ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprints and technical changes reserved / As of: 2019-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -
1.3
Operation
1.3.1 Self test
After it is switched on, the device carries out a self
test and then automatically switches to “dynamic”
mode
1.3.2 Wheel assembly
Select the correct cone to centre the wheel on the balancing flange.
As shown below, the following options are available for mounting the wheel.
The first way of mounting a wheel is shown
opposite.
With this method, the wheel rim is stretched onto
the balancing shaft from the exterior using a cone.
If you are using the largest cone, the extension
piece for the clamping cone must also be used.
The extension piece is secured using the screws
that are supplied.