® Copyright ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprints and technical changes reserved / As of: 2019-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 13 -
1.3.6
Starting the balancing process
The balancing process can be started by turning the wheel.
As soon as the required speed has been reached, “run” will appear
on the display. Manual turning can then be stopped.
The machine measures the wheel imbalance when idling.
The wheel imbalance will appear on the display after the balancing
process.
The braking process can now be initiated.
Now turn the wheel until the respective diodes all light up.
Position the balancing weight on the rim at the 12 o’clock position.
1.4
Technical Data
Maximum wheel weight
< 200 kg
Rim diameter
12 - 24 inches
Rim width
4 - 15 inches
Maximum wheel diameter
1,200 mm
Balancing accuracy in car mode
+/- 1 g / 0.1 ounce
Balancing accuracy in lorry mode
+/- 10 g / 0.1 ounce
Electrical system
1 / 220 V / 50 Hz
Shaft diameter
40 mm
Balancing programmes
“Dynamic” mode (standard)
“Static” mode
Standard “ALU-1”, “ALU-2” & “ALU-3” mode
Machine dimensions (L x W x H)
approx. 1330 x 800 x 1700 mm
Net/gross weight
118 / 180 kg
