ATH-Heinl Cross Lift 50, Operating Instructions Manual

Page: 67 / 450

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 9 -
1.4 Technical Data
Model ATH Cross Lift 50HA
Load capacity of main lift 5,000 kg
Load capacity of wheel-free lift 4,000 kg
Lift time (for 2,000 kg) 70 s
Lowering time (for 2,000 kg) 60 s
Electric system 3/400V/50Hz
Control voltage DC24V
Motor 3.5 kW
rpm 1375
Motor housing B14
Upstream fuse 3 C 16 A
Connection cable Min. 5 x 2.5 m²
Protection type IP 54
Flow rate 4.8 cm³/g
Working pressure ² 300 bar (max. 300 bar)
Required compressed air connection 7 bar
Recommended hydraulic oil Summer (15 °C to 45 °C): HVLP-D 46 (e.g.: Eni PRECIS HVLP-D)
Winter (under 10 °C): HVLP-D 32 (e.g.: Eni PRECIS HVLP-D)
Oil quantity Approx. 18 l
Floor anchor Bolt anchor: M16 x 180 (e.g.: Atrion ABL-W 16-060-180)
Compound anchor: M16 x 190 (e.g.: Atrion AVA-W 16-045-190)
Number of anchors 16 units
Permissible sound level ≤ 80 dB
Weight 2,840 kg
²
The factory set working pressure is adjusted to the maximum power rating. The pressure relief
valve must not be manipulated. Changing the settings can lead to serious damage.
If the stated rated load cannot be lifted, please contact our service team.