® Copyright ATH-Heinl GmbH & Co. KG, 2013, All rights reserved. / Misprints and technical changes reserved / Issue: 09/2016
21
Lubrication plan
Interval:
Components:
Grease type
Monthly
Sliding guides
Multi-purpose grease
Quarterly
Axes
Multi-purpose grease
The lift has to be lubricated, cleanned. All the bent part, metal sheet’s edges respectively welding lines have to be
protected with suitable greases and anticorosive inhibitors.
Maintenance tips:
The lift has to be cleaned and maintained in the regular intervals. (Regardless of the dirt that occurs)
Remove all liquids and other impurities from the lifting platform immediately. The lifting platforms have to be
treated with a cleaning agent (e.g., oil or wax spray)
Damages of the Painting, Zinc surfaces etc, have to be immediately fixed.
In the case of Lifts which are installed/operated outdoor and do not have the appropriate equipment (IP
protection, galvanized version, etc.), no liability is assumed for all the damages caused by external environmental
influences.
• For detailed maintenance and care instructions, refer to the operating inst
ructions.
Maintenance- and service instructions
Check oil level
1. Lower the lift completely
2. Remove tank cap
3. Check the oil level on the tank cap
Exchanging oil
1. Lower the lift completely
2. Remove the oil filling screw
3. Remove carefully the oil drain screw and drain the oil into a suitable recipient
Clean the tank and oil filter to avoid an early pollution of the hydraulic oil.
4. After the complete draining of the oil close the tank with the oil drain screw
5.Fill the new oil into the oil tank
6. Lift and lower the lift and check, if the max. height is still correct. If necessary refill carefully
The used oil must be disposed in consideration of all legal regulations.
