® Copyright by ATH-Heinl GmbH & Co. KG, 2014, All rights reserved /Misprint and technical changes reserved / Issue:
08/2013
14
e. Now the bead holder has to be placed opposite of the duck head, so the leverage of the crowbar is more
easily. Furthermore, it avoids damage on the wheel.
If the leverage is still too heavily, the tire can be pressed down on 3, 6 & 12 o´clock position.
f. As soon as you have levered the wheel, you can remove the bead holder and start to rotating in clockwise
direction.
g. Lift up the tire and demount the second bead.
If the tire is stuck in the rim bead, you can lose it by using the tire support disk.
Regarding the turning of the wheel the disc will moving.
By some wheels it´s also possible to use only the bead roller o demount the second bead.
Here you can mount as following:
o
Place the bead roll under the bead of the tire. Pay attention to have a small gap between the rim and the
bead roller. After this you can push up the bead above the edge of the rim.
