Atest Gaz Sigma MOD DRV, User Manual

Page: 8 / 16

www.atestgaz.pl
5 System architectures
6 Life cycle
6.1 Transport
The device should be transported in the same way as new devices of this type. If the original box or another
protection (e. g. corks) is not available, it is necessary to secure the device against shocks, vibrations and
moisture on one's own, using other equivalent methods.
6.2 Installation
Mount in the control cabinet on the DIN 35 rail or place in the junction box in a place accessible to
authorized operators, however, if possible, in such a way as to make it difficult for unauthorized persons to
access it. It is recommended to use such mounting height which allows easy access to the unit.
If multi-wired strands (commonly referred to as "cables") are used for connecting, the ends of these strands
shall be terminated with terminal sleeves.
If there is a need to connect two strands in one terminal of the device, only the connection in one common
terminal sleeve is allowed.
It is unacceptable to combine in one connector two wires which are not pinched in one cable
lug.
p. 8|10
User's Manual: POD-005-ENG R02
Figure 4: Control unit module – example of system architectures
Sigma
MOD DRV
Operator
PLC
SmArtGas 4 SmArtGas 4
Sigma
MOD LCD
Sigma
MOD LED
EBUS
JCS
Control Unit System
Sigma Gas