Atest Gaz Alpa EcoWent XT, User Manual

Page: 23 / 48

www.atestgaz.pl
9.5 Utilization
This symbol on a product or on its packaging indicates that the product
must not be disposed of with other household waste. Instead, it is the
user's responsibility to ensure disposal of waste equipment by handing it
over to a designated collection point for the recycling of waste electrical
and electronic equipment. The proper recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the
environment. Information about relevant designated collection points can
be obtained from the Local Authority, waste disposal companies and in the
place of purchase. The equipment can also be returned to the
manufacturer.
10 Technical specification
Power supply
• V
CC
• I
CC
10 – 42 V
40 mA
3
Environment In-operation Storage
• Ambient temperatures
• Humidity
• Pressure
-20 – 50 O C
10 – 90% long term
0 – 99% short term
1013 ± 10% hPa
0 – 50 O C
30 – 90% long term
Detected substance Carbon monoxide (CO)
Measuring range 0 – 300 ppm
Standard configuration
• warning 1
• warning 2
• alarm
20 ppm
40 ppm
100 ppm
IP IP 43
Digital input parameters
• R
IN
200 Ω
Analogue output parameters
• R
LOAD_MAX
200 Ω
The output signal according to the operating
status of the detector:
• failure
• operation
• warning 1
• warning 2
• alarm
2.4 mA
4 mA
9 mA
11 mA
15 mA
Integrated signalling equipment (audible) LED Display
Protection class III
Dimensions see Figure 2
Cable glands (cable diameter range) Cable glands pressed into installation pipes – pipe diameter 16 mm
Multi-range cable glands – cable diameter 3.5-12 mm
Acceptable cables 0.25 – 1.5 mm 2 – solid wire
0.25 – 1 mm
2
– stranded wire
3 The given value does not take into consideration the current consumed by the Alpa EcoDet XT detector connected to the X2 terminals.
p. 23|24
User Manual: POD-042-ENG R04