II. Packaging list
No.
1
2
3
4
5
6
Items
Mode 4 charging equipment
User manual
Certificate of quality
Mounting bracket
Cable hooker
Hex head expansion bolt,
M8*80/304 stainless steel
Qty
1
1
1
1
1
9
Remark
Already installed on the rear side of the
charging equipment
III. Installation and wiring
1. Firstly, according to the specific installation height requirement of the user,
determine the installation height of the charging equipment and the installation
height of the cable hooker. According to the dimensions in the following drawings,
drill 4 holes for bracket mounting and 3 holes for cable hooker mounting on the wall.
Take out the expansion bolts in thepacking accessory bag, hammer the expansion
bolts into the holes. Remove the nuts and washers for later use.
2. Loosen the 2 screws at the bottom of the charging equipment that fixes the
mounting bracket, keep them properly for later use. Place the mounting bracket onto
the bolts just installed and screw the nuts and washers. Take out the cable hooker
and fix it using the same procedure.
3. After the mounting bracket and cable hooker is fixed, place the charging
equipment onto the mounting bracket, with the outward bent part inserted to the
slot on the rear side of the charging equipment. Lock the charging equipment onto
the bracket at the bottom using the 2 screws. The installation is done.