ATEQ VT TRUCK, User Manual

Page: 12 / 34

HATR1-02-15
VT TRUCK
– User guide
Page 10/31
1.2. U
SING THE
"S
CAN
"
MODE

 
 
 

  
 
  
Use the up and down arrows to select
"Scan Mode" then press "OK" to
confirm.

  
 
  
Press "Sensor Activation" (green) to
launch the scanning process.

   
  

  

The sensor was read successfully.
The screen displays: the ID of the
sensor, the temperature inside the
tyre, the pressure measured and the
status of the TPMS sensor battery.
Here you are ready to read the first
wheel as shown by the words "Scan
Sensor 1". To change wheels, use the
"up" and "down" arrows.




VT TRUCK successively transmits the
different TPMS sensor wake-up
frames. The step in progress is shown
as "Step x / 4".

  
 
  
To read the next sensor, simply press
"OK". The screen then shows that VT
TRUCK is ready to read the second
sensor: "Sens.It HD 2".