TPMS TOOL
user guide
UM-36600A-U User
manual
ATEQ VT56
Page 34/42
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your
TPMS TOOL
incorporates a low
battery detection circuit. Battery life is an
average of 1000 sensor tests per battery
charge (approximately 200-250 cars).
Battery indicator status:
0% 25% 50% 75% 100%
When 0% is flashing the tool will turn off after
10 seconds.
The battery is charging.
The battery has an issue, please
contact after sales service.
DO NOT
use the tool with low battery status because the transmission and emission may
not be reliable.
When charging, the battery light is red and
becomes green when the battery is fully
charged.
Two means for charging the tool:
¾
Directly plug the supply jack to the tool and plug the supply in an appropriate outlet.
¾
Plug the jack to the docking station and install the tool in. The docking and in all
cases, the LED "
CHARGE
" light will turn on (red).
Battery replacement
It's recommended to return the tool to the factory for battery replacement.
