ATEN VS1912, User Manual

Page: 49 / 60

39
Chapter 5
RS-232 Commands
Overview
In order to use the RS-232 serial interface to attach a high-end controller (such
as a PC) to the VS1912, use a serial cable such as a modem cable. The end
connecting to the VS1912 should have a 9-pin male connector. Connect this to
the serial interface on the rear of the VS1912. Refer to number 4 on the diagram
on page 8.
Note: 1. RS-232 functionality is pending and will be available with future
firmware upgrades.
2. To configure the controller serial port, see the section below.
RS-232 Serial Interface
The VS1912’s built-in bi-directional RS-232 serial interface allows system
control through a high-end controller, PC, and/or home automation / home
theater software package.
Configuring the Serial Port
The controller’s serial port should be configured as follows:
Baud Rate 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None