9
Chapter 3
Operation
Overview
You can operate the VS0108HB using the panel pushbuttons or an RS-232
serial controller. The availability of actions with the two methods is summarized
in the table below.
Switching On/Off the Port
You can switch on/off one or all output ports using the RS-232 command (see
Action
Operation Methods
Panel
Pushbuttons
Serial Controller
Switch Port
Switch on/of one or all output port
3
EDID
Select an EDID Mode
3
3
Select the ATEN default EDID configuration
3
Baud Rate
Set the baud rate
3
Read Information
Read and display information from the
VS0108HB
3
Reset
Reset the VS0108HB to default factory
settings
3
Firmware Upgrade
3
