ATEN VP2730, User Manual, Page: 21 / 130

VP2730 User Manual
13
Installation
Follow the steps below to safely install sources, displays, and other equipment
to the VP2730.
1. Use a grounding wire to ground the unit by connecting one end to the
grounding terminal, and the other end to a suitable grounded object.
Note: Do not omit this step. Proper grounding helps prevent damage to the
unit from surges or static electricity.
2. Connect the unit to sources.
Note: Source (1) and (2) can each receive two sources, but can only output
one at a time.
3. Connect the unit to displays.
a) Use HDMI cables to connect HDMI displays to the HDMI out ports.
b) Use a Cat 5e/6/6a cable to connect an HDBaseT display to the
HDBaseT Out port.
Note: Use a Cat 5e/6 cable to transmit signals of 1080p up to 60 m, or a
Cat 6a/ATEN 2L-2910 Cat 6a cable to extend the transmission up to
70 m.
1
2
3
4
5
6
7
8
A B
C
Internet/
LAN
Streaming 1 Streaming 2