Chapter 3. Front Panel Configuration
29
Save to a Profile
The switch allows users to store up to 8 (VM0404HB) or 16 (VM0808HB)
(numbered P1-P8 or P1–P16) different connection profiles that can be saved
and recalled later.
The active Input-to-Output port connections on the LCD Main Screen is the
configuration saved to a profile. When a user loads a profile, the change is
immediate and the profile number is shown on the lower right corner of the
LCD screen.
To save a profile once the desired port connections are set, do the following:
1. Press the
Menu
pushbutton to access the Menu page, then
8
or
twice
to navigate to the next pages. Press pushbutton
1
to open the select Save to
a Profile page.
2. On the page that opens, you are asked to give the profile a number. Use the
front panel number pushbuttons to select a profile number into which you
want to save the configuration.
VM0404HB
: Options are P1–P8 (when saving a profile via the LCD),
where:
Input port pushbuttons
1–4
correspond to Profile
P1
to
P4
Output port pushbuttons
1–4
correspond to Profile
P5
to
P8
VM0808HB
: Options are P1–P16 (when saving a profile via the LCD),
where:
Input port pushbuttons
1–8
correspond to Profile
P1
to
P8
Output port pushbuttons
1–8
correspond to Profile
P9
to
P16
3. Press
Enter
to store the configuration – the LCD shows Profile Saved.
4. Press
Menu
to return to the Menu page,
5. Press
Cancel
to return to the previous step without saving.
Note:
Access the Save to a Profile page quickly by pressing the
Profile
pushbutton for longer than 3 seconds.
1: Save to a Profile
2: Play the Profile Schedule
7: Back
Save to a Profile No. 0
In 1-8=P1-P8; Out 1-8=P9-16.
