7
Chapter 2
Hardware Setup
Wall Mounting
For convenience and flexibility, the VE819R can be mounted on the wall. To
mount a unit do the following:
1. The paper attached to the appendix(see page 26) illustrates the position of
the main holes. Position accordingly and drill two ¼” holes as instructed.
2. Insert anchors into the wall, followed by the screws. Leave 5/8” of the
screw protruding for mounting the Receiver.
1. Important safety information regarding the placement of this
device is provided on page 18. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation is turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
