ATEN VE44PB, User Manual

Page: 16 / 30

Chapter 1. Introduction
6
VE44PB Rear View
No. Component Description
1 Grounding
Terminal The grounding wire used to ground the unit attaches here.
2 Input
Connectors Connects to a transmitter using an Ethernet cable.
Note: For the signals to pass through, make sure to connect
the transmitter and the receiver to the same Input and Output
Connector pairs.
3 Power Socket Connects to the Power Cord Cable.
4 Power Switch Switch to turn on the unit.
5 Output
Connectors Connects to a PoH compatible receiver (PD) using an
Ethernet cable.
Note: For the signals to pass through, make sure to connect
the receiver and the transmitter to the same Input and Output
Connector pairs.
4
1
2
3
5