Chapter 1. Introduction
6
LED Display
You can find the unit’s LEDs on the top and front panel as illustrated below. See
the table below for details on LED indication.
No.
LED
Indication
Description
1
Auto Switch
Mode LED
Lights orange The unit is in the Auto Switch mode. For
details, see
2
HDMI Mode LED Lights orange The unit is set to transmit HDMI input.
3
VGA Mode LED
Lights orange The unit is set to transmit VGA input.
4
HDMI/VGA In
Status LED
Lights orange The HDMI signal is stable.
Lights green
The VGA signal is stable.
5
Link LED
Lights orange The transmission to the receiver is stable.
Blinks orange The transmission to the receiver is unstable.
6
Power LED
Lights green
The unit is receiving power.
Note:
The Power and Link LED blink at the same time to indicate that the
firmware upgrade is in progress.
Auto Switch Mode LED, HDMI Mode LED, and VGA Mode LED light
and blink at the same time to indicate that the RS-232 mode is changed.
1
2
3
4 5 6
