Chapter 2. Hardware Setup
8
Connecting the VC1280 Unit
Follow the steps below to connect the VC1280 to a source, and other controls
as required.
1. Connect the HDMI In Port on the VC1280 to the HDMI Out Port on your
video source device using an HDMI cable.
2. Connect the VGA In Port on the VC1280 to the VGA Out Port on your
video source device using a VGA cable. To transmit audio, connect the
Audio In Port on your VC1280 to the Audio Jack from your video source.
3. Connect the HDMI Out Port on the VC1280 to the HDMI In Port on your
HDMI display/projector using an HDMI cable.
4. (Optional) For RS-232 serial transmission and source switch control via
RS-232 commands, connect your computer or control system to the
terminal block on the VC1280.
5. Plug the power adapter cable into the Power Jack on the VC1280.
VC1280 (Front)
VC1280 (Rear)
1
2
3
4
5
