4.
In the Installed Network Components panel:
a)
Click on TCP/IP
Î
[Network Adapter]*
b)
Click on the WINS tab; select Disable WINS Resolution
c)
Click on the IP Address tab; select Specify an IP Address; enter
the IP Address and the Subnet Mask (if they are not already
specified), that the Bridge computer uses on the Ethernet LAN.
If you do not know what the IP Address and Subnet Mask
numbers are, get them from your network administrator.
d)
Click on the Gateway tab; enter the Gateway address from the
LAN to the Internet (if it is not already specified). If you do not
know what the Gateway address is, get it from your network
administrator.
*
Network Adapter refers to the network adapter card protocol that
the computer uses. The name of the actual network card protocol
(NE2000 Compatible, for example) will appear here.
The Remote Computers:
1.
Install the USB Network Cable driver according to the instructions
given for Basic Peer to Peer installation, above.
2.
Open the Network folder: My Computer
Î
Control Panel
Î
Network
3.
In the Installed Network Components panel:
a)
Click on TCP/IP
Î
PC-Linq/Net USB Network Adapter
b)
Click on the WINS tab; select Disable WINS Resolution
c)
Select Specify an IP Address; enter a unique IP Address and
the Subnet Mask for each computer on the installation. If you
do not know what the IP Address and Subnet Mask numbers
are, get them from your network administrator.
d)
Click on the Gateway tab; enter the Gateway address from the
LAN to the Internet. If you do not know what the Gateway
address is, get it from your network administrator.
9