ATEN Slideaway CL1008 User Manual Download

Page: 60 / 77

CL1008 / CL1016 User Manual

Upgrade Failed

If the firmware upgrade fails (

Upgrade Succeeded

screen does not appear), you

can recover the situation.

Possible reasons for firmware upgrade failure are:



When a firmware upgrade was manually aborted.



When the unit’s firmware becomes corrupted for some reason and you are
unable to operate it.



When a firmware upgrade procedure is interrupted.



When a firmware upgrade procedure fails.

To recover a failed firmware upgrade, do the following:

1. Click

Cancel

to close the Firmware Upgrade Utility.

2. Power off the unit.

3. Connect the

firmware upgrade cable

to its

firmware upgrade port

4. Slide the

firmware upgrade switch

to the

Recover

position.

5. Power the unit back on and repeat the upgrade procedure (see

Starting the

Upgrade

on page 45).

6. After the unit has been successfully upgraded, power it off, and slide the

firmware upgrade switch

back to the

Normal

position.

7. Power the unit back on again.

Summary of Contents for Slideaway CL1008














































































Search results

Summary of Contents for Slideaway CL1008

Reviews:

Related manuals for Slideaway CL1008

Brands by name

Popular brands

ATEN Slideaway CL1008, User Manual

Search results

Summary of Contents for Slideaway CL1008

Reviews:

Related manuals for Slideaway CL1008

Brands by name

Popular brands