Chapter 5. Telnet Commands
53
Commands
Use the Telnet commands to view and configure the PE4104G as described in
each section. The text-based command line provides some of the same
functions found under the Energy tab of the PE4104G’s web-based GUI.
Commands to view and configure the PE4104G are provide in the following
sections. You can reference information provided in the user manual for the
functions as you use the commands.
Verification
After sending an incorrect command, a verification message appears at the end
of the command line.
Invalid command or exceed max command length
- the command has
the wrong format and/or values. Try typing in the command string again
using the correct format and/or values.
