ATEN Master View CS-88A, User Manual

Page: 35 / 56

Chapter 4. OSD Operation
27
(Continued from previous page.)
(Continues on next page.)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
Note: Only the Ports currently chosen for the LIST view on the
main OSD screen (see page 23), show up here.
To Edit a port name:
1. Use the Navigation Keys to move the highlight bar to it, then
press [Enter] .
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
Š
All alpha characters: a – z; A – Z
Š
All numeric characters: 0 – 9
Š
+ - / : . and Space
Case does not matter; OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc] .
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to
the original factory default settings (see
OSD FACTORY DEFAULT
SETTINGS , page 44) – except for the Names and QUICK VIEW
settings that were assigned to the Ports. These latter two are
saved.
CLEAR THE
NAME LIST This function clears the port name list.
ACTIVATE
BEEPER Choices are Y (for On), or N (for Off). When activated, the beeper
sounds whenever a Port is changed; when activating the Auto
Scan function (see
F7 SCAN , page 29); or an invalid entry is made
on an OSD menu. The default is Y.