ATEN KE6900, User Manual

Page: 220 / 324

KVM over IP Matrix System User Manual
202
Connection Redundancy (KE6910 / 6912 only)
You can setup priority connection for receivers. Where a transmitter fails, this
function allows the receiver to connect to the transmitter of the highest priority
that is available.
Follow the steps below to setup the priority list.
1. Click Enable to enable this function.
2. Click Edit . A window will pop-up to allow editing.
EDID Mode EDID Mode Use this drop-down menu to set the default EDID
mode for all Transmitters. To set a different EDID
mode for each Transmitter, use the drop-down
menu to select
Customized and then click Edit .
A Transmitter list will appear with drop-down
menus to configure each device’s EDID mode.
Connection Redundancy (KE6910
/ 6912 only) Use this drop-down menu to set connection
redundancy function. You can setup priority
connection with this function.
Please refer to
Connection Redundancy (KE6910
/ 6912 only) on page 202.
Save Click to save the changes.
Cancel Click to cancel the changes.
Heading Item Description