ATEN KE6900, User Manual

Page: 134 / 324

KVM over IP Matrix System User Manual
116
Properties Port OS: Use the drop-down menu to select the operating
system of the computer connected to the Transmitter.
OS Language: Use the drop-down menu to select the
operating system language of the computer connected to the
Transmitter.
Enable Multicast Video: Check this box to allow a broadcast of
the Transmitter’s video signal to be sent out to multiple
Receivers.
Enable Multicast Audio: Check this box to allow a broadcast
of the Transmitter’s audio signal to be sent out to multiple
Receivers.
EDID Mode Selection : EDID contains a display's basic
information and is used by the source device to utilize the best
resolution across different monitors. When
Manual or Remix is
selected, the Receiver’s OSD will have a button allowing the
local EDID setting to be configured for the connection. Select
how you want the source device to acquire the display's EDID:
Š
Default : EDID is set to the default ATEN configuration. This
setting must be used when connecting KE6900 devices to
KE8950 devices.
Š
Auto : Checks the EDID of all connected displays and uses
the best resolution for all displays.
Š
Manual : Manually set the EDID configuration from the
Connections Page (see page 121).
Š
Remix : Checks the EDID of all connected displays and the
source device uses the best common resolution for all
displays (see page 121).
Enable Media Select which type of media the Transmitter can stream to
Receivers: Video, Audio, USB, and RS232.
RS232 Settings Configure the serial device settings for the Transmitter. The
default settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
Manager
Address Set the IP address and Port number of the computer running
the KE Matrix Manager software. The default port number is
9110.
Item Description