IP8000 User Manual
22
Filtering
To enable IP and/or MAC filtering,
Click
to put a check mark in the
IP Filter
Enable
and/or
MAC Filter Enable
checkbox. There are a maximum of 100
filters allowed for each.
If the
include
button is checked, all the addresses within the filter range are
allowed access; all other addresses are denied access.
If the
exclude
button is checked, all the addresses within the filter range
are denied access; all other addresses are allowed access.
IP Filtering
To add an IP filter:
1. Click
Add
. A dialog box similar to the one below appears:
2. Specify the filter address in the dialog box, then Click
OK
.
A second dialog box, similar to the one below, appears:
3. To filter a single IP address, key in the same address as the start IP. To
filter a continuous range of addresses, key in the end number of the range.
4. After filling in the address, click
OK
.
5. Repeat these steps for any additional IP addresses you want to filter.
ip8000.book Page 22 Friday, May 9, 2008 10:39 AM
