manualshive.com logo in svg

ATEN eco PE Series, User Manual

Share
Download
ATEN eco PE Series User Manual Download Page 5

eco PDU PE Low Profile Series

v

Package Contents

The eco PDU PE Series package consists of:

1

 PE5324LB / PE5324LG / PE5324LJ / PE5324LKJA / PE5324LJA / 

PE6324LB / PE6324LG / PE6324LJ / PE6324LJA / PE5340SLB / 
PE5340SLG / PE5340SLJ / PE5340SLJA Power  Distribution Unit

1

Mounting Kit

1

User Instructions*

1

CD-ROM 

Check to make sure that all of the components are present and in good order. 
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation 
procedures carefully to prevent any damage to the switch or to any other 
devices on the eco PDU installation.

*

Features may have been added to the eco PDU since this manual was 
published. Please visit our website to download the most up-to-date version.

Copyright © 2015 ATEN® International Co., Ltd.

2015-11-16

NRGence and the NRGence logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. 

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for eco PE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands