ATEN CS1964, User Manual, Page: 13 / 56

Chapter 1. Introduction
5
Components
CS1964 Front View
No. Component Description
1 LED Status Panel This panel contains LED icons that light to indicate mode and port
status. The Mode and Port Selection Pushbuttons have three
corresponding LED icons that light to indicate status – KVM , Audio ,
and USB . Refer to LED Status Panel on page 7 for more info.
2 Port Selection
Pushbuttons
For manual port selection (see Manual Switching , page 17):

Press a port selection pushbutton for longer than two seconds to
bring the KVM, USB hub, and audio focus to the computer
attached to its corresponding port.

Press a port selection pushbutton twice to bring the audio focus
to the computer attached to its corresponding port.

Press a switch for less than two seconds to bring only the KVM
focus to the computer attached to its corresponding port.

Press switches 1 and 2 simultaneously for 2 seconds to start
Auto Scan Mode (see
Auto Scanning , page 23).
3 Mode Selection
Pushbutton

This pushbutton allows you to cycle through the four focus
modes – complete, KVM, audio, and USB.

Press and hold Mode Selection Pushbutton before powering on
and to enter Firmware Upgrade Mode.
4 Console Audio Ports Your console speakers and microphone plug in here.
5 USB 3.1 Gen 1
Peripheral Port USB peripherals (printers, scanners, drives etc.) plug into this port.
This USB 3.1 Gen 1 port features 5 Gbps data transfer rates for
compatible USB peripherals.