ATEN CS18208, User Manual

Page: 77 / 110

Chapter 7. RS-232 Operation
67
Open / Close RS-232 Link
The Open and Close RS-232 Link commands allows you to open/close the link
between the computer sending RS-232 commands and the CS18208 /
CS18216. When the link is open, the CS18208 / CS18216 only accepts RS-232
commands and will not respond to front panel pushbuttons, OSD, hotkeys, and
remote control commands - until the link is closed. The link opens when you
login and closes after 2 minutes if no command is sent.
Use the Formula - to set Parameters - to create a Command .
Formulas:
C [Enter]
Parameters:
Open/Close RS-232 Link Commands
The available formulas for the Open/Close RS-232 Link commands are as
follows:
1. C [Enter]
For example, to open the RS-232 link between the computer and CS18208 /
CS18216, type the following:
open [Enter]
2. C [Enter]
For example, to close the RS-232 link between the computer and CS18208 /
CS18216, type the following:
close [Enter]
Command Description
open Open RS-232 Link command
close Close RS-232 Link command
Enter Description
Enter Enter and send out command