4. Keyboard Port Operation
19
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 14).
2. Press and release
[F5]
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the
following:
1. Invoke HSM (see page 14
).
2. Press and release
[B].
The Beeper toggles On or Off.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),
do the
following:
1. Invoke HSM (see page 14).
2. Press
[X] [Enter]
.
Note:
This procedure is a toggle. To enable the Port Switching keys repeat
steps 1 and 2.
Firmware Upgrade Mode
To set the CS1782 to Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 14).
2. Key in:
upgrade
3. Press
[Enter]
.
The front panel LEDs flash to indicate Firmware Upgrade Mode is in
effect.
Note:
To exit Firmware Upgrade Mode, you must power off the switch.
cs1782.book Page 19 Thursday, June 12, 2008 2:28 PM
