Port Switching
There are two convenient methods to switch the KVM and
Audio focus between the computers: Manual - which involves
pressing the pushbutton port selection switches located on the
unit’s front panel; and Hotkey - which involves entering
combinations from the keyboard.
Manual:
Press the Port Selection switches as follows:
M
Press a switch for longer than two seconds to bring the KVM
and audio focus to the computer attached to its
corresponding port.
M
Press a switch for less than two seconds to bring only the
KVM focus to the computer attached to its corresponding
port.
M
Press switches 1 and 2 simultaneously for 3 seconds to start
Auto Scan Mode. See p. 10 for details.
Hotkeys:
Key in the hotkey combinations according to the information in
the following table:
Hotkey
Action
[Scroll Lock] [Scroll Lock]
[Enter]
Switches the KVM and audio focus from the port
that currently has the KVM focus to the other port
(1 to 2; 2 to 1).
Note that the KVM and audio focus both go to
this port even if they were on different ports to
begin with.
[Scroll Lock] [Scroll Lock] [K]
[Enter]
Brings only the KVM focus from the port that
currently has it to the other port. The audio focus
remains where it is.
[Scroll Lock] [Scroll Lock] [S]
[Enter]
Brings only the audio focus from the port that
currently has it to the other port. The KVM focus
remains where it is.
- 9 -
2005-07-01
Summary of Contents for CS-1262
Page 9: ... 7 1 1 4 2 3 2005 07 01 ...
