ATEN CN9600, User Manual, Page: 67 / 151

Chapter 4. Configuration
55

Flow Control: This allows you to choose how the data flow will be
controlled. Choices are: None, Hardware, and XON/XOFF. Set this to
match the flow control setting of the serial console device. Default is
None.
Note: None is only supported for baud rates of 9600 and lower. For baud
rates greater than 9600, you must choose Hardware or XON/XOFF.
 Enable Serial Port Bypass : For DCE and DTE communication (see
component 2 & 3 of components on page 9), check this option.
 Port Alert Properties : You can specify up to 10 types of events (e.g.,
Power On). Enter them in the provided Alert String (1 - 10) fields.