ATEN CN600, User Manual, Page: 73 / 120

8. AP Operation
61
„
Filtering
Š
There are a maximum of 100 filters allowed for each category (User IPs,
User MACs, and Administrator MACs).
Š
To enable filtering for User Stations, Click to put a check mark in the IP
and/or MAC Filter enable checkbox.
Š
To add a filter, Click Add . A dialog box similar to the ones below appears
(the top example is for IP address filters; the bottom is for MAC address
filters):
Š
Specify the filter address in the dialog box, then Click OK .
Š
Each filter can consist of a single IP or MAC address, or a range of IP
addresses. For a single IP address filter, the address is the same for
both the
From and To fields.
Š
To delete a filter, select it and Click Remove ; To modify a filter, select it
and Click Edit . The Edit dialog box is similar to the Add dialog box. When
it comes up, simply delete the old address and replace it with the new one.
cn6k_2007-02.book Page 61 Wednesday, February 28, 2007 9:26 AM